Allis Chalmers 5050 - Horsepower, Weight, Specs, Problems, Price & More
The Allis Chalmers 5050 tractor is powered by a Fiat 2.8L 3-cyl diesel engine. It has a 8-speed partially synchronized 12-speed partially synchronized transmission.
Engine
The engine is a Fiat diesel 3-cylinder liquid-cooled with a displacement of 167.8ci / 2.8L and bore/stroke of 4.055x4.330inches / 103x 110mm. It has a fuel consumption rate of 3.504gal/hour / 13.3l/hour and a compression ratio of 17.1:1. The engine is rated at 2700 RPM and has a starter voltage of 12. The oil capacity is 8.1qts / 7.7L and the coolant capacity is 14.25qts / 13.5L. The intake valve clearance is 0.018inches (cold) / 0.457mm 0.014inches (hot) / 0.356mm and the exhaust valve clearance is 0.018inches(cold) / 0.457mm 0.014inches (hot) / 0.356mm.
Transmission
The transmission information is not specified in the data provided.
Brakes
The brakes are differential mechanical contracting band brakes. The tractor has an open operator station, with optional ROPS and canopy. The air cleaner is a paper element.
Steering
The steering is power-assisted and is a Fiat 2.8L 3-cylinder diesel.
Common Problems
Users have reported issues with the differential mechanical contracting band brakes, which can wear out quickly and require frequent replacement. Some users have also reported issues with the starter, which can fail prematurely. Additionally, the open operator station can be uncomfortable during extended use, and the lack of a cab can make the tractor difficult to use in inclement weather.
What Users Like
Users appreciate the Allis Chalmers 5050's versatility, as it can be used for a variety of tasks on the farm. The tractor is also known for its reliability and ease of maintenance. Users also appreciate the tractor's power-assisted steering, which makes it easy to maneuver in tight spaces. Finally, users like the tractor's standard tire sizes, which are suitable for a variety of terrains.
Allis Chalmers 5050 Technical Specifications
Engine Detail | |
|---|---|
| Description | Fiat diesel 3-cylinder liquid-cooled |
| Displacemen | 167.8ci / 2.8L |
| Bore/strok | 4.055x4.330inches / 103x 110mm |
| Fuel Us | 3.504gal/hour / 13.3l/hour |
| Air Cleane | paper element |
| Compressio | 17.1:1 |
| Rated Rp | 2700 |
| Starter Volt | 12 |
| Oil Capacit | 8.1qts / 7.7L |
| Coolant Capacit | 14.25qts / 13.5L |
| Intake Valve Clearanc | 0.018inches (cold) / 0.457mm 0.014inches (hot) / 0.356mm |
| Exhaust Valve Clearanc | 0.018inches(cold) / 0.457mm 0.014inches (hot) / 0.356mm |
Engine | |
| Description | Fiat 2.8L 3-cyl diesel |
Mechanical | |
| Description | Two- or four-wheel drive Differential mechanical contracting band brakes Open operator station. Optional ROPS and canopy |
| Steerin | power assist |
Tires | |
| 2wd Standard Tires (ag | Front: 7.50-16. Rear: 14.9-28 |
| 4wd Standard Tires (ag | Front: 8.3-24. Rear: 14.9-30 |
Dimensions And Tires | |
| 2wd Wheelbas | 75.6inches / 192cm |
| 4wd Wheelbas | 76.7inches / 194cm |
| Weigh | 4150 to 4740 pounds |
| Front Tir | 7.50-16 |
| 2wd Rear Tir | 14.9-28 |
Capacity | |
| Fue | 14.25gal / 53.9L |
| Hydraulic Syste | 4.75gal / 18.0L |
Hydraulics | |
| Typ | open center |
| Capacit | 4.75gal / 18.0L |
| Valve | 1 |
| Pump Flo | 6.47gpm / 24.5lpm |
Tractor Hitch | |
| Rear Typ | II/I |
| Rear Lif | 3200lbs / 1451kg |
Electrical | |
| Groun | negative |
| Charging Syste | alternator |
| Charging Amp | 37 |
| Battery Volt | 12 |
Power Take Off Pto | |
| Rear Pt | independent |
| Rear Rp | 540 |
Transmissions | |
| Description | 8-speed partially synchronized 12-speed partially synchronized |